Print

Company Profile old

Written by Super User
Details: Category: About Us | Published: 08 November 2014 | Hits: 7336

1. INTRODUCTION

TAKA HYDROCORE INDONESIA (THI) is an Indonesian company established in 2010 providing exploratory, geotechnical, hydrogeological, environmental and water well drilling work for mining companies, oil and gas companies, infrastructure contractors and consutant firms. THI is a registered company for mining exproration consultant and contractor (SIUPJP) from Indonesian Energgy and Mineral Resources Departement (ESDM) No. 521.K/30/DJB/2012 and a registered company for water drilling. We also a drill rig manufacturing company producing high quality top-drive and multi-purpose rigs.

2. DRILLING SERVICES

2.1. OFFSHORE GEOTECHNICAL DRILLLING

Taka hydrocore owns and operates geotechnical drilling rigs which complete with heave compensated system which can be set u onto vessels of opportunity anywhere. The drill rigs use standard 5.5" API drill pipe and have a capability to drill to 250m or other type of drill pipes.

Wireline tools are available for deployment inside the drill pipe to perform Cone Penetration Test (CPT) and to recover undisturbed samples. The drilling system also incorporates a coring facility enableing core recovery of soil and rock. The wireline system can also be used to raise and lower downhole geophysical logging tools.

2.2. NEARSHORE GEOTECHNICAL DRILLING

To Bring and extend our capability to condut exploratory and geotechnical drilling survey over the water we build wooden staging or wooden platform for shallow deep water down to maximum 3-4 m water depth. We olso developed Modular Pontoon system to allow drilling and getechnical survey to be conducted deeper down to maximum 25 m. CPT/U on the pontoon conducted using downhole CPT system.

We are developing the possibility to use jack up rig to allow drilling and geotechnical survey to be conducted deeper and also getting more reliable result.

2.3. EXPRORATORY DRILLING

Our services in mining exproratory drilling are to provide a high quality coring using suitable equipments and supported by qualified field geologist or supervisors. The drilling can be performed in conventional or wireline method in NQ, HQ or PQ size with depth varies from 20 m to 700 m depending on client requirements. Sampling for exploratory drilling purposed at mining company usually using the standard as requested by the client such as JORC standard.

We have developed some drilling rigs based on how they are mobilized:

2.4. ONSHORE GEOTECHNICAL DRILLING

Standars Geotechnical drilling usually involved some insitu tests while drilling such as Standard Penetration Test, Pressure Meter Test and Field Vane Shear Test. Some disturbed and undisturbed sample are also taken for laboratory analysis. To assure that undisturbed sample can be retrieved in high quality, we are utilizing the proper tools for the specific soil behavior based on their consistency:

We are also able and having intensive experiences to conduct Cone Penetration Test with/without Pore Pressure measuerment. We have developed some CPT Rigs having various driving capacity of 2.5 - 20 tons. There are 3 type of CPT rigs developed:

2.5. SEABED GEOTECHNICAL

We are also providing Seabed Geotechnical survey by developing Seabed CPT and Vibrocore system.

2.6. HYDROGEOLOGY DRILLING

Hydrogeology drilling are intended to study groundwater behavior for environmental purposes such as landfill monitoring program or groundwater supply. We have experience to drill and installation of groundwater monitoring for hydrogeology study of for landfil monitoring programs (pollution detection). We also have experienced to drill and install the wells for water supply. The diameter varies from 4" - 8" pipe installation using the PVC or highy stainless material. The depth also varies from 20 m - 350 m with the flow up to > 55 m3/hour.

We have experiences also to conduct hydrogeology drilling for mining drainage purposes. In this case inclined drillling were applied so that the drilled hole was perpendicular to the water bearing layer.

2.7. OTHER SERVICES

Completing the exploratory, geotechnical and hydrogeological drilling work we also provide the supporting services to those work such as:

3. EQUIPMENT AND FACILITIES

  Right now we are operating:

To support the operational of those rigs we use an international standard tools, such as:

We produce and maintenance our rigs in our workshop facilities at Bandung. This workshop operation also supported by PT. TAKA INDONESIA an Indonesian & a world class rotating equipment manufacturing company, please see www.taka.co.id

4. MANPOWER

THI employs highly experienced geotechnical, hydrogeological and geophysical personel who have had onshore, nearshore and offshore experiences. the employs will be formed to meet effective and high quality field work and reporting work. Presently, the manpower resources consist of:

All the personels are experience with in his field and continuously trained to improve his capability to meet the latest technology demand.

5. HEALTH SAFETY AND ENVIRONMENT

HSE is our prime priority, thus we applied and committed in high HSE standard. The equipment is maintained properly and periodically, and load tested prior to mobilization. Site personel have experience in HSE system of Oil company (BP, Total Indonesia, CNOOC, Kodeco, Santos etc) and Mining Contactors and continuous for CSMS, STOP card AK3 Migas, Sea survival etc.

6. PROJECT EXPERIENCES

Some notable company experience are: